Categories
Electrical

nsxd23277a.pdf

Switch Removal
CAUTION:
All SRS wiring harnesses are covered with yellow
outer insulation.
Before disconnecting any part of the SRS wire
harness, install the short connectors (see page
24-10(’93-’96)).
Replace the entire affected SRS harness assembly if
it has an open circuit or damaged wiring.
1. Remove the dashboard tower cover and disconnect
the connectors from the floor wire harness.
CONNECTORS
FOOT WELL LIGHT
LIGHTS-ON
CHIME
DASHBOARD
LOWER COVER
2. Disconnect the 18-P connector from the floor wire
harness.
CAUTION: Be careful not to damage the SRS wire
harness.
BEAR WINDOW
DEFOGGER SWITCH
18-P
CONNECTOR
3. Remove the tilt cover.
TILT COVER
4. Remove the steering column lower cover and upper
cover.
UPPER COVER
LOWER COVER
NOTE: Be careful not to damage the steering column
covers.
5. Remove the four screws, then remove the rear win-
dow defogger switch and windshield wiper/washer
switch assembly.
REAR WINDOW
DEFOGGER
SWITCH
WINDSHIELD WIPER/WASHER
SWITCH

Attachments