ed84691c99f48e5b5a23cede48e4bcc269180019ca81ab3fb38f388b022102cf

nsxe11097a.pdf

Fuel Filter
Replacement
Do not smoke while working on fuel
system. Keep open flame away from work area.
The filter should be replaced: every 4 years or 60,000
miles (96,000 km), whichever comes first or whenever
the fuel pressure drops below the specified value
(323–363 kPa,3.30–3.70 kg/cm2,46–53 psi with
the pressure regulator vacuum hose disconnected) after
making sure that the fuel pump and the pressure
regulator are OK.
1. Place a shop towel under and around the fuel filter.
2. Relieve fuel pressure (page 11-87).
3. Remove the 12 mm banjo bolt and the fuel feed
pipe from the filter.
4. Remove the fuel filter clamp and fuel filter.
5. When assembling, use new washers, as shown.
WASHER
Replace
WASHER
Replace
10 N·m(1.0 kg-m, 7 Ib-ft)
SERVICE BOLT
12 N·m (1.2 kg.m, 9 Ib-ft)
BANJO BOLT
28 N·m (2.8 kg-m, 20 Ib-ft)
WASHER
Replace
28 N·m
(2.8 kg-m,
20 Ib-ft)

Attachments

Tags: No tags

Comments are closed.