nsxd13012a.pdf

SEALING
BOLT
STEEL
BALLS (5/16 in)
Transmission Housing
Removal
NOTE: Place the clutch housing on two pieces of wood
thick enough to keep the mainshaft from hitting the
workbench.
1. Remove the back-up light switch, neutral position
switch and vehicle speed sensor (VSS).
NEUTRAL
POSITION
SWITCH
VSS
(O-RING Replace .)
BACK-UP LIGHT SWITCH
36 mm SEALING BOLT
SPRING
(L. 25 mm)
ATTACHING
BOLTS
2. Remove the sealing bolts, springs and steel balls.
3. Remove the transmission housing attaching bolts
in a criss-cross pattern in several steps.
4. Remove the 36 mm sealing bolt.
STEEL BALL (3/8 in)
SPRING
(L. 25.1 mm)
SPRING
(L. 30 mm)
TRANSMISSION HOUSING
THRUST SHIM
OIL GUIDE
PLATE
6. Separate the clutch housing from the transmission
housing.
SNAP RING
SNAP RING PLIER
5. Expand the snap ring on the countershaft ball bear-
ing and remove it from the groove using a pair of
snap ring plier.
7. Remove the thrust shim and oil guide plate from the
transmission housing.