nsxb20079a.pdf

Roof Rail Trim, Front and Rear
Replacement
CAUTION:
• Wear gloves to remove and install the trim.
• When prying with a flat tip screwdriver, wrap it with
protective tape to prevent damage.
NOTE:
• Take care not to scratch the trim.
• Remove the roof.
Front roof rail trim:
1. Remove the sunvisor from each side.
Screw location, 4
SUNVISOR
2. Pull away the door trim, then lower the front pillar
trim by detaching the clips from each side. Then
remove the screws.
Screw locations, 4 Clip locations, 8
DOOR TRIM
3. Remove the front roof rail trim by sliding it rearward.
Hook locations, 4
FRONT ROOF
RAIL TRIM
4. Installation is the reverse of the removal procedure.
NOTE:
• If necessary, replace any damaged clips.
• Make sure the door trim is installed securely.
FRONT ROOF
RAIL TRIM
FRONT PILLAR
TRIM

Roof Rail Trim, Front and Rear
Replacement
Rear roof rail trim:
1. Remove the ceiling light (see section 23).
2. Pull away the door trim, then lower the rear pillar
trim by detaching the clips from each side. Then
remove the screws.
Screw locations, 2 Clip locations, 6
REAR ROOF
RAIL TRIM
DOOR
TRIM
REAR PILLAR
TRIM
3. Detach the clips, and remove the rear receiver
damper from each side.
REAR RECEIVER
DAMPER
Clip locations, 2
REAR ROOF
RAIL TRIM
4. Remove the rear roof rail trim by sliding it forward.
Hook locations, 4
REAR ROOF
RAIL TRIM
5. Installation is the reverse of the removal procedure.
NOTE:
• If necessary, replace any damaged clips.
• Make sure the door trim is installed securely.
REAR RECEIVER
DAMPER