Categories
Differential

nsxb15006a.pdf

Differential
Disassembly
1. Hold the differential in a bench vise using a special
tool, then remove the differential housing mounting
bolts in a crisscross pattern in several steps.
BENCH VISE
DIFFERENTIAL
INSPECTION TOOLS
07MAJ-PR90100
2. Remove the differential housing, stopper plate,
washer, thrust needle bearing, and 65 mm shim.
DIFFERENTIAL
HOUSING
WASHER
65 mm SHIM
STOPPER
PLATE
THRUST NEEDLE
BEARING
3. Remove the 112 mm shim, clutch discs, clutch
plates, and 102 mm washer.
112 mm
SHIM
CLUTCH PLATES
CLUTCH DISCS
102 mm WASHER
4. Remove the parts shown below.
WASHERS
65 mm SHIM
CARRIER
ASSEMBLY
THRUST NEEDLE
BEARING
CENTRAL GEAR
THRUST NEEDLE
BEARING
112 mm SHIM
CLUTCH DISC
-SPRING
PLATE

5. Screw two 8 x 1.0 mm bolts into the threaded holes
in the differential housing cover to push it away from
the final driven gear.
NOTE: Turn each bolt two turns at a time to pro-
vent cocking the differential housing cover exces-
sively.

Attachments