nsxb13022a.pdf

Shift Fork Assembly
Disassembly/Reassembly
NOTE:
• Be careful not to lose the 5th shift fork steel ball.
• Install the spring pins so their grooves are 180° apart.
Prior to reassembling, clean all the parts in solvent, dry them, and apply lubricant to any contact surfaces.
Disassembly: Remove the 3 mm spring pin and 5 mm spring pin.
Reassembly: Install the 5 mm spring pin first, then install the 3 mm spring pin.
5TH/REVERSE SHIFT
FORK SHAFT
3RD/4TH SHIFT FORK
SHAFT COLLAR
1ST/2ND SHIFT
FORK SHAFT
5TH SHIFT FORK
SPRING WASHER
8 x 1.0 mm
SPECIAL BOLT
32 N-m (3.2 kg-m, 23 Ib-ft)
3RD/4TH SHIFT FORK
3RD/4TH SHIFT
FORK SHAFT
5 x 25 mm
SPRING PIN
Replace.
1ST/2ND SHIFT FORK
3 x 25 mm
SPRING PIN
Replace.
5 x 25 mm
SPRING PIN
Replace.
Drive to the
surface end.
5TH/REVERSE
SHIFT PIECE
3 x 25 mm
SPRING PIN
Replace.
STEEL
BALL (5/16 in)