Mid Plate Guide
Initialization
NOTE:
• If the pressure plate mounting bolts are unscrewed,
the mid plate guide must be initialized.
• Initialize after tightening the pressure plate mount
bolts.
1. Screw the 5 mm bolt into the back of the flywheel
until it just touches the mid plate guide.
5 x 0.8 mm BOLT
Length of threads
10 mm (0.39 in)
1.5 N-m (0.15 kg-m,
1.1 Ib-ft)
MID PLATE
MID PLATE GUIDE 5 x 0.8 mmBOLT
2. Screw the 5 mm bolt in 1 50 — 210° further.
3. Make sure that:
• The mid plate guide touches the back of the mid
plate
• There is 0.25-0.40 mm (0.010-0.016 in)
clearance between the mid plate guide and the
front of the mid plate
4. Initialize the remaining mid plate guides as describ-
ed above, then remove the 5 mm bolt.
Initialization
NOTE:
• If the pressure plate mounting bolts are unscrewed,
the mid plate guide must be initialized.
• Initialize after tightening the pressure plate mount
bolts.
1. Screw the 5 mm bolt into the back of the flywheel
until it just touches the mid plate guide.
5 x 0.8 mm BOLT
Length of threads
10 mm (0.39 in)
1.5 N-m (0.15 kg-m,
1.1 Ib-ft)
MID PLATE
MID PLATE GUIDE 5 x 0.8 mmBOLT
2. Screw the 5 mm bolt in 1 50 — 210° further.
3. Make sure that:
• The mid plate guide touches the back of the mid
plate
• There is 0.25-0.40 mm (0.010-0.016 in)
clearance between the mid plate guide and the
front of the mid plate
4. Initialize the remaining mid plate guides as describ-
ed above, then remove the 5 mm bolt.