nsxe23190a.pdf

Glove Box Light
Replacement/Test
1. Remove the glove box lower panel.
2. Remove the 8 screws then pull out the glove box.
3. Disconnect the 2-P connectors then remove the
glove box.
GLOVE BOX LOWER
PANEL
4. Remove the 2 screws from the glove box light.
GLOVE BOX
LIGHT
BULB (3.4W)
5. There should be continuity between the A terminal
and B terminal with a bulb installed. There should
be no continuity when the switch is pushed.
From FUSE
No.38 (15 A)
GLOVE BOX
LID
To GROUND
(401, G402)