Lighting System
Headlight/Turn Signal Switch Replacement
SRS components are located in this area. Review the
SRS component locations, precautions, and procedures
in the SRS section 24 before performing repairs or ser-
vice.
1. Remove the dashboard lower cover, and disconnect
the connectors.
2. Remove the dashboard lower pad.
DASHBOARD LOWER
COVER
DASHBOARD LOWER
PAD
3. Remove the tilt cover.
TILT COVER
4. Remove the steering column covers.
NOTE: Be careful not to damage the steering col-
umn covers.
UPPER COVER
LOWER COVER
Headlight/Turn Signal Switch Replacement
SRS components are located in this area. Review the
SRS component locations, precautions, and procedures
in the SRS section 24 before performing repairs or ser-
vice.
1. Remove the dashboard lower cover, and disconnect
the connectors.
2. Remove the dashboard lower pad.
DASHBOARD LOWER
COVER
DASHBOARD LOWER
PAD
3. Remove the tilt cover.
TILT COVER
4. Remove the steering column covers.
NOTE: Be careful not to damage the steering col-
umn covers.
UPPER COVER
LOWER COVER
5. Disconnect the 18-P and 10-P connectors.
CAUTION: Be careful not to damage the SRS wire
harness.
6. Remove the six screws, then remove the headlight-
turn signal switch assembly.
HEADLIGHT SWITCH
10-P CONNECTOR
18-P CONNECTOR
TURN SIGNAL SWITCH
7. If necessary, remove the turn signal cancel unit and
cancel switch.
TURN SIGNAL
CANCEL UNIT
TURN SIGNAL
CANCEL SWITCH
8. If necessary, remove the headlight switch bulb.
HEADLIGHT SWITCH
BULB (0.91 W)