Runout
1. Raise the car off the ground, and support it with safe-
ty stands in the proper locations (see section 1).
2. Place the dial gauge on each front and rear wheel
rim, and turn the wheel slowly by hand. Check the
axial and radial runout for front/rear wheel.
Front and Rear Wheel Axial Runout:
Standard: 0-0.7 mm (0-0.03 in)
Service Limit: 2.0 mm (0.08 in)
Front and Rear Wheel Radial Runout:
Standard: 0—0.7 mm (0—0.03 in)
Service Limit: 1.5 mm (0.06 in)
• If the wheel axial runout exceeds the service limit,
check the bearing end play.
• If the bearing end play is within the service limit,
replace the wheel.
Bearing End Play
Front Wheel End Play:
Standard: 0 mm (0 in)
Service limit: 0.05 mm (0.002 in) max.
Rear Wheel End Play:
Standard: 0 mm (0 in)
Service limit: 0.05 mm (0.002 in) max.
Replace the wheel bearing with new one if the service
limit is exceeded.
1. Raise the car off the ground, and support it with safe-
ty stands in the proper locations (see section 1).
2. Place the dial gauge on each front and rear wheel
rim, and turn the wheel slowly by hand. Check the
axial and radial runout for front/rear wheel.
Front and Rear Wheel Axial Runout:
Standard: 0-0.7 mm (0-0.03 in)
Service Limit: 2.0 mm (0.08 in)
Front and Rear Wheel Radial Runout:
Standard: 0—0.7 mm (0—0.03 in)
Service Limit: 1.5 mm (0.06 in)
• If the wheel axial runout exceeds the service limit,
check the bearing end play.
• If the bearing end play is within the service limit,
replace the wheel.
Bearing End Play
Front Wheel End Play:
Standard: 0 mm (0 in)
Service limit: 0.05 mm (0.002 in) max.
Rear Wheel End Play:
Standard: 0 mm (0 in)
Service limit: 0.05 mm (0.002 in) max.
Replace the wheel bearing with new one if the service
limit is exceeded.