nsxb12017a.pdf

Replacement
1. Remove the flywheel mounting bolts in a criss-
cross pattern in several steps, and remove the
flywheel.
MOUNTING BOLTS
FLYWHEEL
RING GEAR HOLDER
07LAB – PV00100 or
07924 – PD20003
2. Remove the ball bearing from the flywheel.
DRIFT
PUNCH
FLYWHEEL
BALL BEARING
3. Drive the new ball bearing into the flywheel using
the special tools as shown.
DRIVER
07749 – 0010000
ATTACHMENT,
37 x 40 mm
07746 – 0010200
FLYWHEEL
BALL BEARING
4. Align the holes in the flywheel with the mounting
bolt holes, then install the flywheel. Install the bolts
finger tight.
5. Install the special tool, then torque the flywheel
mounting bolts in a crisscross pattern in several
steps as shown.
MOUNTING BOLT
12 x 1.0 mm
105 N-m (10.5 kg-m, 76 Ib-ft)
RING GEAR HOLDER
07LAB – PV00100 or
07924 – PD20003
FLYWHEEL