Categories
Driveshafts

nsxb16007a.pdf

Inspection
: Thoroughly pack the inboard joint and
outboard joint with joint grease included in the new
joint boot set.
Grease Quantity:
NOTE: Mark the rollers and roller grooves during
disassembly to ensure proper positioning during
reassembly.
Spline
direction
INBOARD JOINT
Check splines for wear and damage.
Check inside bore for wear.
Inspect for cracks.
SET RING
Replace.
Pack cavity
with grease.
SET RING ROLLERInspect for faulty movement and wear.
HOLDER
Section AA
INBOARD BOOT
Inspect for cracking,
splitting and wear.
OUTBOARD BOOT
Inspect for cracking,
splitting and wear.
OUTBOARD JOINT
Check splines for wear and damage.
Check inside bore for wear.
Inspect for cracks.
NOTE: Stagger the inboard joint spider and
outboard joint spider 60° apart. To ease
assembly, mark alignment marks on
driveshaft and spiders before disassembl-
ing them.
ROLLER
Inspect for faulty movement and wear.
DRIVESHAFT
SET RING
OUTBOARD
JOINT
SPIDER
CAP
SPRING
SET RING
CIRCLIP
OUTBOARD
JOINT
SPIDER
INBOARD JOINT
SPIDER
BOOT BAND
Replace.
BOOT BANDS
Replace.
BOOT BAND
Replace.
INBOARD
JOINT
SPIDER
SET RING

Attachments