Differential
Illustrated Index
NOTE:
If the parts marked with an asterisk ( * ) are replaced, the bearing preload must be adjusted (see page 15-12).
If replacement is required, always replace the limited slip differential clutch set.
*75 mm THRUST SHIM
Selection, Adjustment, page 15-13
Adjustment, page *TAPERED ROLLER BEARING
Replacement, page 15-5
Inspect for wear and damage.
DIFFERENTIAL HOUSING COVER
Inspect (or wear and damage.
SPRING PLATE
CLUTCH DISC
65 mm SHIM
Adjustment, page 15-8*BEARING OUTER RACE
Replacement, page 15-12
Inspect for wear and damage.
FINAL DRIVEN GEAR
Inspect for wear and damage.
WASHER
112 mm SHIM
Adjustment.
page 15-11
CENTRAL GEAR
Inspect for wear and damage.
WASHERS
102 mm WASHER
THRUST NEEDLE BEARINGS
Inspect for wear and damage.
CLUTCH DISCS
112 mm SHIM
65 mm SHIM
WASHER
CARRIER ASSEMBLY
Inspect for wear and damage.
STOPPER PLATE
*TAPERED ROLLER BEARING
Replacement, page 15-5
Inspect for wear and damage.
*90 mm WASHER
CLUTCH PLATES
THRUST NEEDLE BEARING
Inspect for wear and damage.
DIFFERENTIAL HOUSING
Inspect for wear and damage.
8 x 1.0 mm SPECIAL BOLTS
40 N·m (4.0 kg-m. 29 Ib-ft)
*BEARING OUTER RACE
Replacement, page 15-12
Inspect for wear and damage.
*OIL GUIDE RING
Replacement, page 15-12
Illustrated Index
NOTE:
If the parts marked with an asterisk ( * ) are replaced, the bearing preload must be adjusted (see page 15-12).
If replacement is required, always replace the limited slip differential clutch set.
*75 mm THRUST SHIM
Selection, Adjustment, page 15-13
Adjustment, page *TAPERED ROLLER BEARING
Replacement, page 15-5
Inspect for wear and damage.
DIFFERENTIAL HOUSING COVER
Inspect (or wear and damage.
SPRING PLATE
CLUTCH DISC
65 mm SHIM
Adjustment, page 15-8*BEARING OUTER RACE
Replacement, page 15-12
Inspect for wear and damage.
FINAL DRIVEN GEAR
Inspect for wear and damage.
WASHER
112 mm SHIM
Adjustment.
page 15-11
CENTRAL GEAR
Inspect for wear and damage.
WASHERS
102 mm WASHER
THRUST NEEDLE BEARINGS
Inspect for wear and damage.
CLUTCH DISCS
112 mm SHIM
65 mm SHIM
WASHER
CARRIER ASSEMBLY
Inspect for wear and damage.
STOPPER PLATE
*TAPERED ROLLER BEARING
Replacement, page 15-5
Inspect for wear and damage.
*90 mm WASHER
CLUTCH PLATES
THRUST NEEDLE BEARING
Inspect for wear and damage.
DIFFERENTIAL HOUSING
Inspect for wear and damage.
8 x 1.0 mm SPECIAL BOLTS
40 N·m (4.0 kg-m. 29 Ib-ft)
*BEARING OUTER RACE
Replacement, page 15-12
Inspect for wear and damage.
*OIL GUIDE RING
Replacement, page 15-12