nsxe23234a.pdf

Stereo Sound System
Rear Speaker Replacement
1. Remove the center armrest and upper bulkhead panel
(see section 20).
2. Remove the bulkhead panels.
3. Remove the 5 screws, then disconnect the 2-P con-
nector from the floor wire harness.
CENTER BULKHEAD PANEL
R. BULKHEAD
PANEL
2-P CONNECTOR
L. BULKHEAD
PANEL
4. Remove the 4 screws, then take the rear speaker out
of the center bulkhead panel.
CENTER BULKHEAD PANEL
Foot Well Bass Speaker Replacement
1. Pull the right front floor carpet back.
2. Remove the foot well bass speaker cover.
COVER
CARPET
3. Disconnect the 2-P and 6-P connectors, then remove
the 2 bolts from the EPS power unit. Remove the
foot well bass speaker assembly.
EPS POWER UNIT
FOOT WELL BASS SPEAKER ASSEMBLY