nsxd14124a.pdf

O-RINGS
Replace.
3RD CLUTCH ASSEMBLY
3RD GEAR COLLAR
PARKING GEAR
RETAINER PLATE
1ST GEAR COLLAR
NEEDLE BEARINGS
34 x 40 x 20 mm
ONE-WAY
CLUTCH
1ST GEAR
1ST-HOLD CLUTCH
HUB
THRUST NEEDLE
BEARING
THRUST WASHER
O-RINGS
Replace.
1ST-HOLD CLUTCH
ASSEMBLY
LOCKNUT
Replace.
140 N·m
(14.0 kg-m, 101 Ib-ft)CONICAL SPRING
REVERSE GEAR COLLAR
THRUST WASHER
REVERSE GEAR
NEEDLE BEARING
37 x 43 x 16 mm
4TH GEAR
NEEDLE BEARING
Separate type
CATION:
Use needle bearing
of same color.
2ND GEAR
THRUST NEEDLE
BEARING
3RD GEAR
NEEDLE BEARING
44 x 52 x 24.5 mm
THRUST NEEDLE
BEARING
COUNTERSHAFT
Check splines for excessive wear or damage.
Check bearing surface for scoring, scratches or
excessive wear.
Countershaft
Disassembly/Inspection/Reassembly
Lubricate all parts with ATF during reassembly.
Install thrust needle bearings with unrolled edge of bearing retainer facing washer.
Inspect thrust needle and needle bearings for galling and rough movement.
Locknut has left-hand threads.
Before installing the O-rings, wrap the shaft splines with tape to prevent damage to the O-rings.
REVERSE
SELECTOR
REVERSE
SELECTOR HUB
COTTER
RETAINER
COTTERS
2ND GEAR
SPACER
WASHER
Replace.
CAUTION: Before installing the 1st-hold clutch O-rings, install the 1st gear collar and thrust washer.
NOTE: