A/T Gear Position Switch Test
1. Remove the front console, then disconnect the
12-P connector from the A/T gear position switch.
2. Check for continuity between the terminals in each
switch position according to the table.
• Move the lever back and forth at each position
without touching the push button, and check for
continuity within the range of free play of the
shift lever.
• If there is no continuity within the range of free
play, adjust the position of the A/T gear position
switch (see page 23-160).
A/T GEAR POSITION SWITCH
12-P CONNECTOR
View from wire side.
A/T Gear Position Switch (For cruise control)
1. Remove the front console, then disconnect the
12-P connector from the A/T gear position switch.
2. Check for continuity between the terminals in each
switch position according to the table.
• Move the lever back and forth at each position
without touching the push button, and check for
continuity within the range of free play of the
shift lever.
• If there is no continuity within the range of free
play, adjust the position of the A/T gear position
switch (see page 23-160).
A/T GEAR POSITION SWITCH
12-P CONNECTOR
View from wire side.
A/T Gear Position Switch (For cruise control)