Categories
Electrical

nsxb23234a.pdf

Cigarette Lighter
Relay Test
1. Remove the glove box (see section 20).
2. Disconnect the 4-P connector from the cigarette
lighter relay (wire colors of 4-P connector: BLU/
GRN, YEL/RED, BRN/YEL, BLK).
3. Check continuity at the relay terminals.
• There should be continuity between the C and D
terminals.
• There should be continuity between the A and B
terminals when power and ground are connected
to the C and D terminals.
• There should be no continuity between the A
and B terminals when power is disconnected.

Attachments