Categories
Electrical

nsxb23188a.pdf

Lighting System
Retractor Motor Test
1. Remove the retractor motor.
2. Test the motor by connecting battery power to the
A terminal and ground to the D terminal.
The motor should run continuously.
3. If the motor does not run or fails to run smoothly,
replace it.
NOTE: The illustration shows the motor in the con-
dition when the headlight is fully raised.
RETRACTOR
KNOB
View from
terminal side
B C
Terminal
Position
At closed position
At open position
4. Disconnect the power supply, and check for con-
tinuity between the terminals according to the ta-
ble while turning the retractor knob clockwise.

Attachments