Categories
Body

nsxb20112a.pdf

Engine Cover/Roof Cover
Replacement
NOTE:
• Take care not to scratch the body.
• Open the rear hatch.
Roof cover (Engine cover) removal:
1. Open the roof cover, remove the nuts, then remove
the roof cover.
Nut locations, 4
6 x 1.0 mm
10 N-m (1.0 kg-m,
7.2 Ib-ft) STRIKER
ROOF COVER
LATCH
NOTE: After installing the roof cover, adjust the
roof cover latch by using shims to make the roof
cover lock securely (see page 20-113).
2. If removing the engine cover, remove the ground
wire, disconnect the roof holder switch connector,
then detach the harness clip from the left side (see
page 20-111). Remove the nuts, then remove the
engine cover.
Nut locations, 4
ENGINE COVER
ENGINE
COVER
HINGE
NUTS
6 x 1.0 mm 10 N-m
(1.0 kg-m, 7.2 Ib-ft)
3. Installation is the reverse of the removal procedure.
NOTE: Make sure the roof cover opens properly and
locks securely.
ROOF COVER

Opener/Latch/Opener cable/Hook stop/Roof stop
bracket removal:
1. Open the engine cover. Remove the screws, then
remove the support rod bracket. Remove the push
nuts, then remove the engine cover insulator.
ENGINE
COVER SUPPORT ROD
BRACKET
ENGINE COVER
INSULATOR
2. Remove the roof cover latch, roof cover opener and
roof cover opener cable from the engine cover.
NOTE: Take care not to bend the roof cover opener
cable.
6 x 1.0 mm
10 N-m (1.0 kg-m,
7.2 Ib-ft)
ROOF COVER
OPENER ENGINE COVER
SHIMS
Thickness: 1.0 mm
(0.039 in)
ROOF COVER
LATCH
ROOF COVER
OPENER CABLE
ROOF COVER
OPENER
R OOF COVER
OPENER CABLE
KNOB
ROOF COVER
LATCH
ROOF COVER
OPENER CABLE

Engine Cover/Roof Cover
Replacement
3. Remove the roof stop brackets and hook stops from
the engine cover.
LEFT ROOF STOP BRACKET/
ROOF HOLDER SWITCH
RIGHT
ROOF STOP
BRACKET
ENGINE
COVER HOOK STOPS
CONNECTOR
LEFT ROOF
STOP BRACKET
This screw on the right
roof stop bracket is
screw A.
Nut locations, 4
6 x 1.0 mm
10 N-m (1.0 kg-m,
7.2 Ib-ft)
HOOK STOP
4. Installation is the reverse of the removal procedure.
NOTE:
• Make sure the roof cover opens properly and
locks securely.
• Make sure the roof fits on the engine cover
securely.
HOOK
STOP
ROOF HOLDER
SWITCH ENGINE
COVER
ROOF
ROOF SIDE.
HOOK
ROOF

Attachments