Reassembly
1. Install the clutch disc, clutch plate, central gear,
and carrier assembly.
NOTE: Lubricate the clutch disc surface with
transmission fluid.
CARRIER ASSEMBLY
CENTRAL GEAR
CLUTCH PLATE
CLUTCH DISC
DIFFERENTIAL
HOUSING
COVER
2. Install the final driven gear.
NOTE: Align the mark on the differential housing
cover with the mark on the final driven gear.
FINAL
DRIVEN
GEAR
MARK
MARK
3. Install the 102 mm washer, clutch discs, clutch
plates, and 112 mm thrust shim.
NOTE:
• Lubricate the clutch discs with transmission fluid.
• Position the 112 mm thrust shim with the
thickness size mark facing away from the clutch
discs.
Thickness Size
Mark
CLUTCH PLATES
112 mm THRUST
SHIM
CLUTCH DISCS
102 mm WASHER
4. Install the 60 mm washer, spring plate, and stopper
plate.
STOPPER PLATE
SPRING PLATE
60 mm WASHER
DIFFERENTIAL
HOUSING
Differential
Reassembly
5. Install the special tools on the stopper plate as
shown.
CLUTCH SPRING
COMPRESSOR
ATTACHMENT
07LAE-PX40100
STOPPER PLATE
CLUTCH SPRING
COMPRESSOR
ATTACHMENT
07GAE-PG40200
CLUTCH SPRING
COMPRESSOR
BOLT ASSEMBLY
07HAE-PL50100
6. Compress the spring plate, then install the stopper
clip.
7. Install the differential housing.
NOTE: Align the fingers of the clutch plates and
clutch discs.
DIFFERENTIAL HOUSING
Align the fingers.
8. Make sure the differential housing touches the final
driven gear.
DIFFERENTIAL
HOUSING
CLUTCH PLATE
Touching
FINAL DRIVEN GEAR
9. Hold the differential in a bench vise using a special
tool, then install the differential housing mounting
bolts.
NOTE: Tighten the bolts in a crisscross pattern in
several steps.
8 x 1.0 mm SPECIAL BOLTS
40 N-m (4.0 kg-m, 29 Ib-ft)
BENCH
VISE DIFFERENTIAL
INSPECTION TOOLS
07MAJ – PR90100