nsxb08012a.pdf

Oil Cooler, Oil Filter Base
Illustrated Index
NOTE:
• Use new O-rings when reassembling.
• Apply oil to O-rings before installation.
• Use liquid gasket, Part No. 08718-0001.
OIL COOLER CENTER BOLT
50 N-m (5.0 kg-m. 36 Ib-ft)
2 mm PIN
O-RING
Replace
SPECIAL BOLTS
8 x 1.25 mm
22 N-m (2.2 kg-m,
16 Ib-ft)
Replace.
OIL FILTER BASE
SPRING
RELIEF VALVE
Valve must slide freely in bolt bore.
If valve is scored, replace it.
ENGINE OIL COOLER
O-RING
Replace.
OIL FILTER
22 N-m (2.2 kg-m,
16 Ib-ft)
Replacement, 8-5 ENGINE OIL
PRESSURE SWITCH
18 N-m (1.8 kg-m, 13 Ib-ft)
1/8 in. BSPT (British Standard
Pipe Taper) 28 Threads/inch.
Use proper liquid gasket.
8 x 1.25 mm
22 N-m (2.2 kg-m, 16 Ib-ft)