nsxb06020a.pdf

CKP/CYP Sensor
Replacement
NOTE: Turn the crankshaft so fhat the No. 1 piston is at
top dead center (see page 6-19 (’91-’93) or (’94-’96))
1. Remove the timing belt (see page 6-15 (’91-’93) or (’94-’96)
2. Remove the front intake end exhaust camshaft
pulleys.
3. Remove the back cover.
4. Remove the CKP/CYP sensor from the front
cylinder head.
5. Install the CKP/CYP sensor in the reverse order of
removal.
Refer to page 6-18 (’91-’93) or (’94-’96) and 19 when
(’91-’93) or (’94-’96) installing thetiming belt.
10 x 1.25 mm
70 N·m (7.0 kg-m,
51 Ib-ft)
6 x 1.0 mm
12N·m II.2 kg-m,
9 Ib-ft)
FRONT INTAKE
CAMSHAFT PULLEY CKP/CYP
SENSOR
FRONT
CAMSHAFTS
TIMING
BELT
FRONT EXHAUST
CAMSHAFT PULLEY
10 x 1.25 mm
70 N·m (7.0 kg-m,
61 Ib-ft)
BACK
COVER
MIDDLE COVER
6 x 1.0 mm
12N·m (1.2 kg-m.
9 Ib-ft) LOWER COVER