Rear Roof Stop Guide Replacement
CAUTION: To prevent damage, place the roof on an
appropriate pad.
1. Remove the roof.
2. Remove:
• Roof front trim (see page 20-82)
• Roof side trim (see page 20-82)
• Roof side lock (see page 20-83)
• Rear roof lock guide (see page 20-90)
3. Remove the rear end of the roof side seal (see page
20-84).
NOTE: Take care not to damage the roof side seal.
If it is damaged, replace it with new one.
4. Remove the screw, then remove the rear roof stop
guide.
5. Installation is the reverse of the removal procedure.
NOTE:
• Install the roof side seal properly as described on
page 20-85.
• Before installing the roof trim, install the roof on
the body, then check that the seals fit flush (see
page 20-107).
Screw location, 1
REAR ROOF
STOP GUIDE
CAUTION: To prevent damage, place the roof on an
appropriate pad.
1. Remove the roof.
2. Remove:
• Roof front trim (see page 20-82)
• Roof side trim (see page 20-82)
• Roof side lock (see page 20-83)
• Rear roof lock guide (see page 20-90)
3. Remove the rear end of the roof side seal (see page
20-84).
NOTE: Take care not to damage the roof side seal.
If it is damaged, replace it with new one.
4. Remove the screw, then remove the rear roof stop
guide.
5. Installation is the reverse of the removal procedure.
NOTE:
• Install the roof side seal properly as described on
page 20-85.
• Before installing the roof trim, install the roof on
the body, then check that the seals fit flush (see
page 20-107).
Screw location, 1
REAR ROOF
STOP GUIDE