nsxb12010a.pdf

Pressure Plate, Clutch Disc, Mid Plate
Removal
1. Install the special tools.
RING GEAR HOLDER
07LAB – PV00100 or
07924 – PD20003
ADJUSTER
NUT
ADJUSTER
BOLT
BOLT
ENGINE
BLOCK
NUT
WASHER
2. To prevent warping, unscrew the pressure plate
mounting bolts in a crisscross pattern in several
steps, then remove the pressure plate and the 1st
clutch disc.
3. Remove the release bearing from the pressure
plate.
MOUNTING BOLT
1ST CLUTCH DISC
RELEASE BEARING
PRESSURE PLATE
4. Remove the mid plate and the 2nd clutch disc.
FLYWHEEL
2ND CLUTCH DISC
MID PLATE
5. Remove the spring collar and damper washer from
the flywheel.
FLYWHEEL
SPRING
COLLAR
DAMPER WASHER