Troubleshooting
NOTE: The numbers in the table show the troubleshooting sequence.
Intermittent Wiper Relay Test
1. Remove the wiper intermittent relay from the
under-hood relay box B.
2. There should be continuity between the A and C
terminals when power and ground are connected to
the E and F terminals.
There should be continuity between the B and C
terminals when power is disconnected.
NOTE: The numbers in the table show the troubleshooting sequence.
Intermittent Wiper Relay Test
1. Remove the wiper intermittent relay from the
under-hood relay box B.
2. There should be continuity between the A and C
terminals when power and ground are connected to
the E and F terminals.
There should be continuity between the B and C
terminals when power is disconnected.