nsxd06035a.pdf

RUBBER BAND
WASHERS EXHAUST ROCKER
Replace. SHAFT
INTAKE ROCKER
SHAFT
Rear Cylinder Head:
SEALING BOLTS 20 mm
60N.m (6.0 kg-m, 43 Ib-ft)
INTAKE ROCKER
SHAFT
WASHERS
Replace.
EXHAUST ROCKER
SHAFT
Front Cylinder Head:
SEALING BOLTS 20 mm
60N.m (6.0 kg-m, 43 Ib-ft)
RUBBER BAND
EXHAUST ROCKER ARM ASSEMBLIES
Rocker Arms and Shafts
Locations
Identify parts as they are removed to ensure reinstallation in original locations.
Inspect rocker shafts and rocker arms (pages 6-36 and 37).
Rocker arms must be installed in the same position if reused.
Install the rocker arms after torquing the cylinder head bolts.
Prior to reinstalling, clean all the parts in solvent, dry them and apply lubricant to any contact surfaces.
RUBBER BAND
CYLINDER NUMBER
CYLINDER NUMBER
RUBBER BAND
NOTE:
CAUTION: After installing the rocker shaft orifice, try to turn the rocker shaft to make sure that the orifice has been
inserted in the hole of the rocker shaft correctly. If the orifice is in place, it should not turn.
EXHAUST ROCKER ARM ASSEMBLIES
INTAKE ROCKER ARM ASSEMBLIES