Hydraulic System
Relieving Accumulator/Line Pressure
Use the Bleeder T-Wrench before disassembling the parts shaded in the illustration.
1. Drain the brake fluid from the master cylinder and modulator reservoir thoroughly.
2. Remove the red cap from the bleeder on the top of the power unit.
3. Install the special tool on the bleeder screw and turn it out slowly 90° to collect high pressure fluid into reservoir.
Turn the special tool out one complete turn to drain the brake fluid thoroughly.
4. Retighten the bleeder screw and discard the fluid.
5. Reinstall the red cap.
MODULATOR RESERVOIR
HIGH PRESSURE
HOSE
BLEEDER T-WRENCH
07HAA-SG00100
or
07HAA-SG00101
SOLENOID HEAD
ACCUMULATOR/
PRESSURE SWITCH
RED CAP
MAINTENANCE
BLEEDER
5.5 N·m
(0.55 kg-m. 4.0 Ib-ft)
POWER UNIT
Relieving Accumulator/Line Pressure
Use the Bleeder T-Wrench before disassembling the parts shaded in the illustration.
1. Drain the brake fluid from the master cylinder and modulator reservoir thoroughly.
2. Remove the red cap from the bleeder on the top of the power unit.
3. Install the special tool on the bleeder screw and turn it out slowly 90° to collect high pressure fluid into reservoir.
Turn the special tool out one complete turn to drain the brake fluid thoroughly.
4. Retighten the bleeder screw and discard the fluid.
5. Reinstall the red cap.
MODULATOR RESERVOIR
HIGH PRESSURE
HOSE
BLEEDER T-WRENCH
07HAA-SG00100
or
07HAA-SG00101
SOLENOID HEAD
ACCUMULATOR/
PRESSURE SWITCH
RED CAP
MAINTENANCE
BLEEDER
5.5 N·m
(0.55 kg-m. 4.0 Ib-ft)
POWER UNIT