Power Unit
Replacement
1. Remove the floor mat and speaker cover.
2. Disconnect the connector from the speaker and re-
move the speaker by removing the bolt and nut.
SPEAKER COVER
5. Remove the power unit by disconnecting the con-
nector.
10 N.m
(1.0 kg-m, 7 lb-ft)
3. Remove the power unit bracket.
4. Bend terminal nut tabs back and remove the ter-
minal nuts and disconnect the cables from the
power unit terminals.
Installation is the reverse order of removal.
NOTE:
SPEAKER
TERMINAL NUT
10 N·m
(1.0 kg-m, 7 Ib-ft)
BRACKET
POWER UNIT
10 N·m
(1.0 kg-m,
7 Ib-ft)
POWER UNIT
After tightening the terminal nuts, bend up the
terminal nut tabs against the nut securely.
Turn the ignition switch ON and check the EPS
indicator light for operation.
Replacement
1. Remove the floor mat and speaker cover.
2. Disconnect the connector from the speaker and re-
move the speaker by removing the bolt and nut.
SPEAKER COVER
5. Remove the power unit by disconnecting the con-
nector.
10 N.m
(1.0 kg-m, 7 lb-ft)
3. Remove the power unit bracket.
4. Bend terminal nut tabs back and remove the ter-
minal nuts and disconnect the cables from the
power unit terminals.
Installation is the reverse order of removal.
NOTE:
SPEAKER
TERMINAL NUT
10 N·m
(1.0 kg-m, 7 Ib-ft)
BRACKET
POWER UNIT
10 N·m
(1.0 kg-m,
7 Ib-ft)
POWER UNIT
After tightening the terminal nuts, bend up the
terminal nut tabs against the nut securely.
Turn the ignition switch ON and check the EPS
indicator light for operation.