Illustrated Index
CAUTION:
Before disassembling the gearbox, wash it off with solvent and a brush.
Thoroughly clean all disassembled parts.
Replace parts with damaged sliding surfaces.
SET SCREW LOCKNUT
FLANGE BOLT
PINION DUST SEAL
Check for damage.
STEERING
GROMMET A
Check for damage.
STEERING
GROMMET B
Check for damage.PINION
SET SCREW
PINION
BEARING
Check for damage.
FLANGE BOLTS
Corrosion resistant bolt/nut
CYLINDER HOUSING
Inspect for damage to
inner surface.
STEERING
GEARBOX BRACKET
CUSHION B
Check for damage.
FLANGE BOLT
60 N·m
(6.0 kg-m, 43 Ib-ft)
10 mm FLANGE NUT
60 N·m
(6.0 kg-m, 43 Ib-ft)
MOUNT BASE
10 mm FLANGE NUT
60 N·m
(6.0 kg-m, 43 Ib-ft)
LOWER BEARINGS
Check for damage.
STEERING PINION
LOCK NUT
RACK GUIDE SCREW
PRESSURE SPRING
PRESSURE PLATE
RACK GUIDE
GEARBOX
Inspect for damage to
inner surface.
MOUNT COLLER
MOUNTING BUSHING
Check for damage.
STEERING RACK
Inspect surface for damage.
BOOT BAND
Replace.
STOP WASHER
LOCK WASHER
Replace.
RACK END
55 N·m (5.5 kg-m, 40 Ib-ft)
BOOT
Check for damage.
STEERING GREASE
(Honda P/N 08733-B070E)
Coat the inside of the boot.
SILICONE GREASE
Coat the sliding
surface of the
rack end.
TIE-ROD
LOCKNUT
44 N.m
(4.4 kg-m,
32 Ib-ft)
TIE-ROD END
BOOT
Replace.
SET RING
TUBE CLAMP
COTTER PIN
Replace.
CASTLE NUT
44 N·m (4.4 kg-m, 32 Ib-ft)
CAUTION:
Before disassembling the gearbox, wash it off with solvent and a brush.
Thoroughly clean all disassembled parts.
Replace parts with damaged sliding surfaces.
SET SCREW LOCKNUT
FLANGE BOLT
PINION DUST SEAL
Check for damage.
STEERING
GROMMET A
Check for damage.
STEERING
GROMMET B
Check for damage.PINION
SET SCREW
PINION
BEARING
Check for damage.
FLANGE BOLTS
Corrosion resistant bolt/nut
CYLINDER HOUSING
Inspect for damage to
inner surface.
STEERING
GEARBOX BRACKET
CUSHION B
Check for damage.
FLANGE BOLT
60 N·m
(6.0 kg-m, 43 Ib-ft)
10 mm FLANGE NUT
60 N·m
(6.0 kg-m, 43 Ib-ft)
MOUNT BASE
10 mm FLANGE NUT
60 N·m
(6.0 kg-m, 43 Ib-ft)
LOWER BEARINGS
Check for damage.
STEERING PINION
LOCK NUT
RACK GUIDE SCREW
PRESSURE SPRING
PRESSURE PLATE
RACK GUIDE
GEARBOX
Inspect for damage to
inner surface.
MOUNT COLLER
MOUNTING BUSHING
Check for damage.
STEERING RACK
Inspect surface for damage.
BOOT BAND
Replace.
STOP WASHER
LOCK WASHER
Replace.
RACK END
55 N·m (5.5 kg-m, 40 Ib-ft)
BOOT
Check for damage.
STEERING GREASE
(Honda P/N 08733-B070E)
Coat the inside of the boot.
SILICONE GREASE
Coat the sliding
surface of the
rack end.
TIE-ROD
LOCKNUT
44 N.m
(4.4 kg-m,
32 Ib-ft)
TIE-ROD END
BOOT
Replace.
SET RING
TUBE CLAMP
COTTER PIN
Replace.
CASTLE NUT
44 N·m (4.4 kg-m, 32 Ib-ft)