THRUST NEEDLE
BEARING
SEALING RINGS
35 mm
3RD GEAR
NEEDLE BEARING
37 x 43 x 22 mm
2ND GEAR
THRUST NEEDLE
BEARING
THRUST WASHER
O-RINGS
Replace.
2ND CLUTCH
ASSEMBLY
SPACER 31 mm
LOCKNUT
Replace.
140 N.m
(14.0 kg-m. 101 Ib-ft)
CONICAL SPRING
WASHER
Replace.
SECONDARY SHAFT
Check splines for excessive
wear or damage.
Check bearing surface for
Lubricate all parts with ATF during reassembly.
Install thrust needle bearings with unrolled edge of bearing retainer facing washer.
Inspect thrust needle and needle bearings for galling and rough movement.
Before installing the O-rings, wrap the shaft splines with tape to prevent damage to the O-rings.
NOTE:
Disassembly/Inspection/Reassembly
Secondary Shaft
scoring, scratches or exces-
sive wear.
BEARING
SEALING RINGS
35 mm
3RD GEAR
NEEDLE BEARING
37 x 43 x 22 mm
2ND GEAR
THRUST NEEDLE
BEARING
THRUST WASHER
O-RINGS
Replace.
2ND CLUTCH
ASSEMBLY
SPACER 31 mm
LOCKNUT
Replace.
140 N.m
(14.0 kg-m. 101 Ib-ft)
CONICAL SPRING
WASHER
Replace.
SECONDARY SHAFT
Check splines for excessive
wear or damage.
Check bearing surface for
Lubricate all parts with ATF during reassembly.
Install thrust needle bearings with unrolled edge of bearing retainer facing washer.
Inspect thrust needle and needle bearings for galling and rough movement.
Before installing the O-rings, wrap the shaft splines with tape to prevent damage to the O-rings.
NOTE:
Disassembly/Inspection/Reassembly
Secondary Shaft
scoring, scratches or exces-
sive wear.