nsxd14118a.pdf

O-RING
Replace.
4TH ACCUMLATOR
PISTON
1ST ACCUMULATOR
PISTON
O-RINGS
Replace.
DOWEL PIN
THROTTLE
SEPARATOR PLATE
THROTTLE
VALVE BODY
THROTTLE VALVE BSERVO VALVE
(SHIFT FORK SHAFT)
6 x 1.0 mm
12 N.m
(1.2 kg-m, 9 Ib-ft)
ATF MAGNET
O-RING
Replace.
ATF STRAINER
6 x 1.0 mm
12 N.m (1.2 kg-m. 9 Ib-ft)
ACCUMULATOR
COVER
6 x 1.0 mm
12 N.m
(1.2 kg-m, 9 Ib-ft)
SERVO DETENT
SERVO BODY
SEAT
CAP
3RD ACCUMULATOR
PISTON
Servo Body/Throttle Valve Body
Disassembly/lnspection/Reassembly
Clean all parts thoroughly in solvent or carburetor cleaner, and dry with compressed air.
Blow out all passages.
Replace valve body as an assembly if any parts are worn or damaged.
Check all valves for free movement. If any fail to slide freely, see Valve Body Repair on page 14-109.
Coat all parts with ATF before reassembly.
Replace the O-rings.
BASE
NOTE:

SPRING SPECIFICATIONS Unit of length: mm (in)
After disassembly of the ATF strainer, check that it is in good condition, and the inlet opening is not clogged.
Replace the strainer with a new one if it is clogged or damaged.
The strainer can be reused if it is not clogged. Clean the inlet opening thoroughly with compressed air before reinstall-
ing it.
ATF STRAINER
INLET OPENING
NOTE: