nsxb23260a.pdf

Power Mirrors
Door Mirror Actuator Replacement
1. Remove the mirror and actuator assembly from the
housing (see section 20).
2. Place the mirror on a flat, padded surface. Pull up
on the spring-loaded lug, and remove the roll pin.
LUG
ROLL PIN
3. Pull the actuator away from the mirror. If the actua-
tor shafts do not come off with the actuator, pry
them out of their sockets.
ACTUATOR
MIRROR
4. Discard the actuator and shafts.
5. Set the new actuator on the back of the mirror with
the lug protruding through the middle. Pull up on
the lug, and install the roll pin removed in step 3.
6. Press the actuator shafts into the sockets on the
mirror.
PIN
(Align with slot)
SLOT
7. Install the mirror and actuator assembly in the
housing (see section 20).
8. Test the mirror’s operation.