Starting System
Solenoid Plunger Inspection
Check the contact points and face of the starter
solenoid plunger for burning, pitting or any other
defects. If surfaces are rough, recondition them with a
strip of #500 or #600 sandpaper.
CONTACT POINTS
SOLENOID
PLUNGER
POINT CONTACTING
FACE
Starter Field Winding Test
1. Check for continuity between the brushes. If
there’s no continuity, replace the armature
housing.
2. Check for continuity between each brush and the
armature housing (ground).
If continuity exists, replace the armature housing.
BRUSHES
ARMATURE HOUSING
(GROUND)
Solenoid Plunger Inspection
Check the contact points and face of the starter
solenoid plunger for burning, pitting or any other
defects. If surfaces are rough, recondition them with a
strip of #500 or #600 sandpaper.
CONTACT POINTS
SOLENOID
PLUNGER
POINT CONTACTING
FACE
Starter Field Winding Test
1. Check for continuity between the brushes. If
there’s no continuity, replace the armature
housing.
2. Check for continuity between each brush and the
armature housing (ground).
If continuity exists, replace the armature housing.
BRUSHES
ARMATURE HOUSING
(GROUND)