nsxb17059a.pdf

Illustrated Index
CAUTION: Do not try to disassemble the power steering gearbox. If the gearbox is faulty, replace it as an assembly.
Corrosion resistant bolt/nut
10 x 97 mm
FLANGE BOLT
GEARBOX ASSEMBLY
STEERING
GEARBOX BRACKET
CUSHION B
Check for damage.
10 x 84 mm
FLANGE BOLT
60 N-m
(6.0 kg-m, 43 Ib-ft)
10 x 97 mm
FLANGE BOLT
60 N-m
(6.0 kg-m, 43 Ib-ft)
MOUNT BASE
10 mm FLANGE NUT
60 N-m
(6.0 kg-m. 43 Ib-ft)
FLANGE BOLT
10 N-m
(1.0 kg-m, 7 Ib-ft)
GROUND CABLE
STOP WASHER
LOCK WASHER
Replace.
RACK END
TIE-ROD END
STEERING GROMMET
Check for damage.
WIRE HARNESS STAY
10 mm FLANGE NUT
60 N-m
(6.0 kg-m, 43 Ib-ft)
FLANGE BOLT
10 N-m
(1.0 kg-m, 7 Ib-ft)
MOUNT COLLER
MOUNT BUSHING
Check for damage.
FLANGE BOLT
10 N-m
(1.0 kg-m, 7 Ib-ft)
TERMINAL
GUARD
COTTER PIN
Replace.CASTLE NUT44 N-m
(4.4 kg-m, 32 Ib-ft)
TUBE CLAMP
BOOT
Replace.
SET RINGSTEERING GREASE
(Honda P/N 08733-B070E)
Coat the inside of the boot.
SILICONE GREASE
Coat the sliding surface
of the rack end.
TIE-ROD
LOCKNUT
44 N.m
(4.4 kg-m, 32 Ib-ft)
55 N-m (5.5 kg-m, 40 Ib-ft)
BOOT
Check for damage.