nsxb15019a.pdf

Bearing
Replacement
NOTE:
• The bearing and outer race should be replaced as a
set.
• Inspect and adjust the bearing preload whenever the
bearing is replaced.
1. Remove the tapered roller bearings using the bear-
ing pullers.
BEARING PULLER
(Commercially
available)
TAPERED ROLLER
BEARING
BEARING PULLER
(Commercially
available)
TAPERED ROLLER
BEARING
2. Install the tapered roller bearings using a special tool
and a press as shown.
NOTE: Press the tapered roller bearings squarely
until they bottom against the case.
Transmission Housing Side:
STEEL PLATE PRESS
TAPERED ROLLER
BEARING
Clutch Housing Side:
STEEL PLATE
TAPERED ROLLER
BEARING
ATTACHMENT,
45 x 55 mm I.D.
07MAD-PR90100
PRESS
ATTACHMENT,
45 x 55 mm I.D.
07MAD-PR90100