nsxb10002a.pdf

Cooling
Illustrated Index
System is under high pressure when the
engine is hot. To avoid danger of releasing scalding
engine coolant, remove the cap only when the engine is
cool.
Total Cooling System Capacity: Including expansion
tank 2.1 (2.2 US qt. 1.8 Imp qt)
5 M/T: 16.0 (17.0 US qt, 14.1 Imp qt)
4 A/T: 16.5 (17.4 US qt, 14.5 Imp qt)
NOTE:
• Check all cooling system hoses for damage,
leaks or deterioration and replace if necessary.
• Check all hose clamps and retighten if
necessary.
• Use new O-rings when reassembling.
Radiator, Water Pipes and Hoses:
BLEED BOLT
10 N-m (1.0 kg-m,
7 Ib-ft)
WASHER
Replace.
HEATER PIPE
RADIATOR
LOWER HOSE
RADIATOR
UPPER HOSE
RADIATOR
Engine coolant refilling and
bleeding, page 10-5
Leak test, page 10-8
Inspect soldered joints and
seams for leaks.
Blow out dirt from between
core fins with compressed air.
If insects, etc., are clogging
radiator, wash them off with
low-pressure water.
BLEED PLUG
RESISTOR
RADIATOR DRAIN
PLUG
FRONT LOWER
WATER PIPE
FRONT UPPER
WATER PIPE
FAN SHROUD
5 x 0.8 mm
4.5 N-m (0.45 kg-m, 3.3 Ib-ft)
Replace.
BLEED BOLT
10 N-m (1.0 kg-m,
7 Ib-ft)
WASHERS
Replace.
WATER PIPE
DRAIN BOLTS
15 N-m (1.5 kg-m, 11 Ib-ft)
WATER
PIPE ASSEMBLY
WASHER
Replace.
FAN MOTOR

EXPANSION TANK
Refilling and bleeding, page 10-5
Leak Test, page 10-8
ENGINE OIL
COOLER PIPE
AUTOMATIC TRANSMISSION
FLUID (ATF) COOLER
ENGINE
OIL COOLER
CAP
Test, page 10-8