Category: Differential

Oil Seal Removal 1. Remove the differential assembly. 2. Remove the oil seal from the transmission housing. OIL SEAL Replace. TRANSMISSION HOUSING 3. Remove the oil seal from the torque converter housing. OIL SEAL Replace. TORQUE CONVERTER HOUSING Attachments nsxb15025a (32 kB)

Oil Seal Installation 1. Install the oil seal into the transmission housing using the special tools as shown. DRIVER 07749-0010000 BEARING DRIVER ATTACHMENT 07965-SAO0600 OIL SEAL Replace. PILOT, 32 x 50 mm 07MAD-PR90200 2. Install the oil seal into the clutch housing using the special tools as shown. DRIVER 07749-0010000 SEAL DRIVER ATTACHMENT 07947-SD90100 or […]

Special Tools Ref. No. Tool Number 07GAD — SD40101 07GAE — PG40200 07HAE — PL50100 07LAE — PX40100 07MAD — PR90100 07MAD — PR90200 07MAJ — PR90100 07746 — 0010500 07746 — 0010600 07749 — 0010000 07947 — SD90100 or 07947 — SD90101 07965 — SA00600 Description Bearing Driver Attachment Clutch Spring Compressor Bolt Assembly […]

Differential Illustrated Index NOTE: If the parts marked with an asterisk (*) ere replaced, the bearing preload must be adjusted (see page 15-26 parts marked with * 76 mm THRUST SHIM Selection, Adjustment, page 15-27 * TAPERED ROLLER BEARING Replacement, page 15-19 Inspect for operation. FINAL DRIVEN GEAR Inspect for wear and damage. CLUTCH DISC […]

Differential Disassembly 1. Hold the differential in a bench vise using a special tool, then remove the differential housing mounting bolts in a crisscross pattern in several steps. BENCH VISE DIFFERENTIAL INSPECTION TOOLS 07MAJ-PR90100 2. Remove the differential housing, then install the special tools on the stopper plate as shown. CLUTCH SPRING COMPRESSOR ATTACHMENT 07LAE-PX40100 […]

Special Tools Ref. No Tool Number Description Qty Page Reference 07GAD—SD40101 07MAD—PR90100 07MAD—PR90200 07MAJ—PR90100 07746—0010500 07746—0010600 07749—0010000 07947—S090100 or 07947—SD90101 07965—SA00600 Bearing Driver Attachment Attachment, 45 x 55 mm I.D. Pilot, 32 x 50 mm Differential Inspection Tools Attachment, 62 x 68 mm Attachment, 72 x 75 mm Driver Seal Driver Attachment Bearing Driver Attachment […]

I Oil Seal Removal 16. Tighten the mounting bolts in a crisscross pattern in several steps. 8 x 1.0 mm SPECIAL BOLTS 40 N·m (4.0 kg-m, 29 Ib ft) 1. Remove the differential assembly. 2. Remove the oil seat from the transmission housing. OIL SEAL Replace. DIFFERENTIAL INSPECTION TOOLS 07MAJ–PR90100 BENCH VISE TRANSMISSION HOUSING 112 […]

Bearing Replacement NOTE: • The bearing and outer race should be replaced as a set. • Inspect and adjust the bearing preload whenever the bearing is replaced. 1. Remove the tapered roller bearings using the bear- ing pullers. BEARING PULLER (Commercially available) TAPERED ROLLER BEARING BEARING PULLER (Commercially available) TAPERED ROLLER BEARING 2. Install the […]

Preset Torque Inspection On-Car: 1. Block the front wheels. 2. Shift to low gear. 3. Lift up rear wheels, and place the safety stand (Lift and Support Points, see section 1). 4. Measure preset torque clockwise using a torque wrench as shown. Standard: 120-280 N-m (12-28 kg-m, 87-203 Ib-ft) Service Limit: 60 N-m (6 kg-m, […]