Starter Switch Signal
This signals the ECM when the engine is cranking.
Inspection of Starter Switch Sig-
nal.
NOTE:
• M/T: Clutch pedal must be depressed.
• A/T: Transmission in position.
ECM CONNECTORS
Measure voltage between ECM
connector terminals C6 and A26
with the ignition switch in the
start position.
WIRE SIDE OF FEMALE TERMINALS
Is there battery voltage?
Is the fuse OK?
Repair short in the wire
between the ECM (C6) and
the No. 7 STARTER SIGNAL
(7.5 A) fuse or the PGM-FI
main relay.
Replace the No. 7 STARTER
SIGNAL (7.5 A) fuse.
Starter switch signal is OK.
Repair open in the wire between
the ECM (C6) and the No. 7
STARTER SIGNAL (7.5 A) fuse.
Inspect the No. 7 STARTER SIG-
NAL (7.5 A) fuse in the under-
dash fuse box.
This signals the ECM when the engine is cranking.
Inspection of Starter Switch Sig-
nal.
NOTE:
• M/T: Clutch pedal must be depressed.
• A/T: Transmission in position.
ECM CONNECTORS
Measure voltage between ECM
connector terminals C6 and A26
with the ignition switch in the
start position.
WIRE SIDE OF FEMALE TERMINALS
Is there battery voltage?
Is the fuse OK?
Repair short in the wire
between the ECM (C6) and
the No. 7 STARTER SIGNAL
(7.5 A) fuse or the PGM-FI
main relay.
Replace the No. 7 STARTER
SIGNAL (7.5 A) fuse.
Starter switch signal is OK.
Repair open in the wire between
the ECM (C6) and the No. 7
STARTER SIGNAL (7.5 A) fuse.
Inspect the No. 7 STARTER SIG-
NAL (7.5 A) fuse in the under-
dash fuse box.