Countershaft Bearing (Clutch Housing)
Replacement
1. Remove the bearing retaining plate.
BEARING RETAINING
PLATE
6 x 1.0 mm BOLTS
Replace.
2. Remove the needle bearing with the special tool,
then remove the oil guide plate.
3/8″-16
SLIDE HAMMER
(Commercially
available)
ADJUSTABLE BEARING
PULLER, 25-40 mm
07736 – A01000A
OIL HOLE
NEEDLE BEARING
OIL GUIDE PLATE
3. Position the oil guide plate and new needle bearing
in the bore of the clutch housing.
NOTE: Position the needle bearing with the oil hole
facing up.
4. Drive the needle bearing using the special tools as
shown.
DRIVER
07749 – 0010000
ATTACHMENT, 62 x 68 mm
07746 – 0010500
5. Install the bearing retaining plate, and stake the bolt
heads in the groove in the bearing retaining plate.
6 x 1.0 mm SPECIAL BOLT
12 N-m (1.2 kg-m, 9 Ib-ft)
Replace.
BEARING RETAINING PLATE
Replacement
1. Remove the bearing retaining plate.
BEARING RETAINING
PLATE
6 x 1.0 mm BOLTS
Replace.
2. Remove the needle bearing with the special tool,
then remove the oil guide plate.
3/8″-16
SLIDE HAMMER
(Commercially
available)
ADJUSTABLE BEARING
PULLER, 25-40 mm
07736 – A01000A
OIL HOLE
NEEDLE BEARING
OIL GUIDE PLATE
3. Position the oil guide plate and new needle bearing
in the bore of the clutch housing.
NOTE: Position the needle bearing with the oil hole
facing up.
4. Drive the needle bearing using the special tools as
shown.
DRIVER
07749 – 0010000
ATTACHMENT, 62 x 68 mm
07746 – 0010500
5. Install the bearing retaining plate, and stake the bolt
heads in the groove in the bearing retaining plate.
6 x 1.0 mm SPECIAL BOLT
12 N-m (1.2 kg-m, 9 Ib-ft)
Replace.
BEARING RETAINING PLATE