Combination Light /Turn Signal Switch Test
16-P CONNECTOR
1. Remove the dashboard lower cover and knee bolster
pad.
2. If necessary, remove the knee bolster.
3. Disconnect the 16-P connector from the floor wire
harness.
4. Check for continuity between the terminals, in each
switch position according to the table.
View from wire side
Turn Signal Switch
Headlight/Dimmer/Passing Switch
16-P CONNECTOR
1. Remove the dashboard lower cover and knee bolster
pad.
2. If necessary, remove the knee bolster.
3. Disconnect the 16-P connector from the floor wire
harness.
4. Check for continuity between the terminals, in each
switch position according to the table.
View from wire side
Turn Signal Switch
Headlight/Dimmer/Passing Switch