nsxb12003a.pdf

Illustrated Index
NOTE:
Whenever the transmission is removed, clean and grease the release bearing sliding surface.
If the parts marked * are removed, the clutch hydraulic system must be bled.
Bleed the clutch hydraulic system (see page 12-6).
Inspect the hoses for damage, leaks, interference, and twisting.
FLYWHEEL
Inspection, page 12-16
Replacement, page 12-17
MID PLATE
Removal, page 12 -10
Inspection, page 12 -13
Installation, page 12 -18
2ND CLUTCH DISC
Removal, page 12-10
Inspection, page 12-12
Installation, page 12-18
DAMPER
WASHER
PRESSDRE PLATE
Removal, page 12-10
Inspection, page 12-11
Installation, page 12-18
TRANSMISSION
1ST CLUTCH DISC
Removal. page 12-10
Inspection, page 12-12
Installation, page 12-18
SPRING
COLLAR
RELEASE BEARING
Removal, page 12-10
Inspection, page 12-11
Installation, page 12-18
RELEASE FORK
SLAVE CYLINDER
•CLUTCH DAMPER
COTTER PIN
Replace.
0-RING
Replace.
*RESERVOIR HOSE
ASSIST SPRING
CLUTCH MASTER CYLINDER
MID PLATE GUIDE
Inspection. page 12 -13
Initialization. page 12-14
Replacement, page 12-15
*15 N·m (1.5 kg-m.
11 lb-ft)
*RESERVOIR
*19 N·m (1.9 kg-m.
14 lb-ft)
*CLUTCH PIPE
*19 N·m (1.9 kg-m,
14 Ib-ft)
*CLUTCH
HOSE
CLEVIS PIN
DOWEL PIN