nsxd14083a.pdf

Mainshaft/Countershaft
Speed Sensors
Replacement
1. Remove the 6 mm bolt from the transmission hous-
ing and remove the mainshaft and countershaft
speed sensors.
2. Replace the O-ring with a new one before
reassembling the mainshaft and countershaft
speed sensors.
3. Install the washer on the countershaft speed
sensor.
NOTE: Do not install the washer on the mainshafl
speed sensor.
4. Install the speed sensor(s) in the transmission
housing.
6 x 1.0 mm
12 N.m (1.2 kg-m, 9 Ib-ft)
COUNTERSHAFT SPEED
SENSOR WASHER
COUNTERSHAFT SPEED
SENSOR
MAINSHAFT SPEED SENSOR
6 x 1.0 mm
12 N·m (1.2 kg-m, 9 Ib-ft)