Steering Wheel
Disassembly/Reassembly
Store a removed airbag assembly with the
pad surface up. If the airbag is improperly stored face
down, accidental deployment could propel the unit with
enough force to cause serious injury.
NOTE: If an intact airbag assembly has been removed
from a scrapped car or has been found defective or dam-
aged during transit, storage or service, it should be
deployed (see section 24).
CAUTION:
• Carefully inspect the airbag assembly before install-
ing. Do not install an airbag assembly that shows
signs of being dropped or improperly handled, such
as dents, cracks or deformation.
• Always keep the short connector on the airbag con-
nector when the harness is disconnected.
• Do not disassemble or tamper with the airbag assem-
bly.
STEERING WHEEL
STEERING WHEEL
LOWER COVER
ACCESS PANEL
AIRBAG ASSEMBLY
CRUISE CONTROL SET/
RESUME SWITCH
STEERING
WHEEL NUT TORX BOLT
Replace. 10 N.m
(1.0 kg-m, 7 Ib-ft)
Replace.
Disassembly/Reassembly
Store a removed airbag assembly with the
pad surface up. If the airbag is improperly stored face
down, accidental deployment could propel the unit with
enough force to cause serious injury.
NOTE: If an intact airbag assembly has been removed
from a scrapped car or has been found defective or dam-
aged during transit, storage or service, it should be
deployed (see section 24).
CAUTION:
• Carefully inspect the airbag assembly before install-
ing. Do not install an airbag assembly that shows
signs of being dropped or improperly handled, such
as dents, cracks or deformation.
• Always keep the short connector on the airbag con-
nector when the harness is disconnected.
• Do not disassemble or tamper with the airbag assem-
bly.
STEERING WHEEL
STEERING WHEEL
LOWER COVER
ACCESS PANEL
AIRBAG ASSEMBLY
CRUISE CONTROL SET/
RESUME SWITCH
STEERING
WHEEL NUT TORX BOLT
Replace. 10 N.m
(1.0 kg-m, 7 Ib-ft)
Replace.