nsxb10004a.pdf

Radiator
Replacement
1. Remove the spare tire.
2. Drain the radiator (see page 10-5 thru 10-7).
3. Disconnect the fan motor connector and the
resistor connector.
4. Remove the upper and lower hoses from the
radiator.
5. Remove the bracket and the radiator.
Install the radiator in the reverse order of removal:
NOTE:
• Set the upper and lower cushions securely.
• Fill the radiator and bleed the air (see page 10-5
thru 10-7).
6 x 1.0 mm
10 N-m (1.0 kg-m, 7 Ib-ft)
RADIATOR BRACKET
UPPER CUSHIONS
RESISTOR CONNECTOR
FAN MOTOR
CONNECTOR
RESISTOR CONNECTOR
LOWER CUSHIONS
FAN MOTOR
CONNECTOR
UPPER HOSE
LOWER HOSE