nsxd14112a.pdf

Toward spring.
Toward outside of valve body.
Toward spring.
Toward outside of valve body.
Toward spring.
Caps with flat ends and a groove around the cap are
installed with the groove side opposite the spring.
Toward spring.
Caps with one projected tip and hollow end are in-
stalled with the tip toward the spring. The tip is a
spring guide.
Toward outside of valve body.
Toward outside of valve body.
Caps with hollow ends are installed with the hollow
end away from the spring.
Caps with notched ends are installed with the notch
toward the spring.
Caps with flat ends and a hole through the center are
installed with the smaller hole toward the spring.
Caps with one projected tip and one flat end are in-
stalled with the flat end toward the spring.
Caps with a projected tip on each end are installed
with the smaller tip toward the spring. The small tip
is a spring guide.
Valve Caps
Description